For a 2008 to 2014 WRX or a 2008 to 2020 STI, the AEM 50-1215 340 LPH pump with mounting hooks is the direct-fit pick, and for a 2015 to 2021 WRX it is the AEM 50-1220 pump without hooks, which dealers also list for 2002 to 2007 WRX and 2004 to 2007 STI cars. Both are ethanol compatible, and the Wrench Masters listing for the 50-1220 says 320 LPH, which AEM now rates at 340 LPH. The 400 LPH inline pumps are not direct fit and suit larger builds. Owners of the 2022 and newer WRX should confirm before ordering, since the sources reviewed list no AEM pump for those cars.
Wrench Masters sells and works on WRX and STI builds in St. Petersburg, FL, and AEM fuel pumps are some of the most requested parts for them. The lineup is also confusing, because the part numbers, the 320 and 340 LPH labels, and the fitment lists do not line up neatly. This guide sorts the pumps by model year, explains the naming, and covers E85, wiring, and legality.
Which AEM Fuel Pump Fits Which WRX or STI Year?
| Years | Car | Direct-fit pump | E85 | Notes |
|---|---|---|---|---|
| 2002 to 2007 | WRX, and STI from 2004 | AEM 50-1220, without hooks, per dealers | Yes | Dealers list this pump for these years, and COBB sells a kit built around an AEM 340 LPH pump |
| 2008 to 2014 | WRX, and STI through 2020 | AEM 50-1215, with mounting hooks | Yes | Listed for the 2008 to 2014 WRX and 2008 to 2020 STI, and by one dealer for the 2005 to 2009 Legacy GT |
| 2015 to 2021 | WRX | AEM 50-1220, without hooks | Yes | Dealers suggest pairing it with an application-specific install kit |
| 2015 to 2021 | STI | AEM 50-1215, with mounting hooks | Yes | Dealers list the 50-1215 through the 2020 or 2021 STI |
| 2022 and newer | WRX | No AEM listing found | Not applicable | Confirm with the shop before ordering |
Fitment comes from AEM’s dealers, and AEM itself notes that its high-flow pumps may not suit every application even when the physical size matches the factory pump. Dealers disagree slightly on the edges, with the 50-1215 listed through 2020 by most and through 2021 by one, and the 50-1220 listed for both the 2015 to 2021 WRX and the earlier 2002 to 2007 cars. A quick check of year, model, and trim before ordering avoids most problems.
Why Are Some AEM Pumps Labeled 320 LPH and Others 340?
AEM revised its ratings. According to a MotoIQ report on the change, AEM’s in-tank pumps are now rated at 340 LPH at 40 psi and its inline pumps at 400 LPH at 40 psi, where the older labels used 320 and 380 LPH at 43 psi. The part numbers stayed the same, so a listing that says 320 LPH and one that says 340 LPH can describe the same pump family under old and new ratings.
The Wrench Masters listings follow the same pattern. Its pump without hooks says 320 LPH, and the high-pressure inline pump says 380 LPH, while AEM’s current ratings are 340 and 400. When comparing, use the part number: 50-1215 for the pump with hooks, 50-1220 for the pump without, 50-1200 and 50-1000 for the general in-tank kits, and 50-1005 and 50-1009 for the inline pumps.
Do You Need the E85-Compatible Pump?
For most buyers, yes. AEM’s ethanol-compatible pumps are tested with fuels up to E100 and methanol up to M100, and they are built for the low lubricity of ethanol. The 50-1000, by contrast, is the gasoline-only version, and dealers describe it as a general-use pump that is not a direct plug-and-play swap in most applications.
A pump alone does not make a car safe on E85. Ethanol needs more fuel volume, and owners also need injectors, a sensor, and a tune matched to the blend. The post on E85 versus pump gas on the WRX and STI explains what changes, and the COBB flex fuel kit guide covers the flex fuel side.
When Do You Need a Bigger Fuel Pump at All?
Many owners do not, and the answer depends on the fuel system and the power goal. The post on how much power the stock WRX and STI fuel system can handle covers the factory limit, and the guide to fuel pumps versus injectors explains which upgrade matters first. A third post, on when you actually need bigger injectors, covers the other half of the decision.
Direct-Fit or Inline: Which Pump Suits Which Build?
The direct-fit in-tank pumps suit most street and E85 builds, because they replace the factory pump in the factory location. Inline pumps are a different category. AEM rates its 400 LPH inline pumps at over 400 LPH at 40 psi, and it says they install externally or in the tank with optional hardware sold separately. They come in two fitting styles, the 50-1005 with AN fittings and the 50-1009 with metric fittings, and neither is a bolt-in replacement for a Subaru pump.
That makes the inline pumps a decision for builds that have outgrown the in-tank options. The guide on the AEM 340LPH 65mm versus 380LPH inline comparison covers that choice in detail, and the guide to the AEM inline fuel pump for the WRX and STI explains what installing one involves.
What Else Do You Need to Install an AEM Pump?
The pump is only part of the job. AEM’s 50-1215 kit includes a wiring harness, pre-filter, and O-rings, and dealers note that the plug wiring may need updating for some applications. For the 2015 to 2021 WRX, dealers suggest an application-specific install kit, and a wiring kit is the usual solution for cars where the factory connector does not match.
The walkthroughs on how to wire and install the AEM 340LPH 65mm fuel pump and the DIY fuel pump wiring kit guide cover the steps, and the Wrench Masters shop installs fuel system parts for owners who prefer not to open the tank themselves.
Are AEM Fuel Pumps CARB Legal?
Dealer listings say no for the pumps in this guide. One lists the 50-1215 as not CARB legal, and another lists the 50-1220 as not for sale in California. COBB sells a separate kit for the 2002 to 2007 WRX and 2004 to 2007 STI built around an AEM 340 LPH pump, and it lists that kit as 50-state legal, so owners in CARB states should look at that option or ask the Wrench Masters team about status before ordering.
Where Can You Read More?
The AEM 340LPH fuel pump guide covers what the pump supports, and the posts on the AEM 340LPH in-tank kit and the 65mm kit explain each version. Hubs for the WRX fuel system upgrades and the STI fuel system upgrades organize the full path, and the fuel delivery category and the AEM brand page list the parts. More guides sit in the Subaru blog category.
Frequently Asked Questions
Which AEM fuel pump fits a 2015 WRX?
Dealers list the AEM 50-1220, the pump without mounting hooks, for the 2015 to 2021 WRX. They suggest pairing it with an application-specific install kit.
Which AEM fuel pump fits a 2008 to 2014 WRX or an STI?
The AEM 50-1215, the pump with mounting hooks, is listed for the 2008 to 2014 WRX and the 2008 to 2020 STI. It is ethanol compatible and includes a wiring harness, pre-filter, and O-rings.
Is the AEM 320 LPH pump the same as the 340 LPH pump?
They belong to the same family under old and new ratings. AEM now rates its in-tank pumps at 340 LPH at 40 psi, so use the part number, not the LPH label, to compare.
Does the AEM fuel pump work with E85?
The 50-1200, 50-1215, and 50-1220 are tested with ethanol up to E100. Gasoline-only is the 50-1000, and a pump alone does not make a car safe on E85.
Do I need a tune after installing an AEM fuel pump?
A pump on its own does not change the tune. Bigger injectors, E85, or more boost do, so confirm the plan with a tuner before changing several parts at once.
Can I install an AEM fuel pump myself?
Many owners do, since the job involves dropping the fuel tank or accessing the pump, wiring it correctly, and checking for leaks. The linked walkthroughs cover the steps, and a shop installation is an option for owners who prefer it.
0 Comments for “Which AEM Fuel Pump Fits Your WRX or STI? Fitment by Year”